Step 1:
Using the Premium Repair Set for oiled/waxed surfaces, ensure the damaged area is clean, dry, and free of grease. Remove any loose or raised particles before beginning the repair.
Using the Premium Repair Set for oiled/waxed surfaces, ensure the damaged area is clean, dry, and free of grease. Remove any loose or raised particles before beginning the repair.
Step 2:
Choose suitable colour tones, always using a range of shades from light to dark. For deeper scratches, mix coloured waxes with transparent wax to add depth to the repair.
Choose suitable colour tones, always using a range of shades from light to dark. For deeper scratches, mix coloured waxes with transparent wax to add depth to the repair.
Step 3:
Melt and mix small amounts of filler using the heated Battery Melter.
Melt and mix small amounts of filler using the heated Battery Melter.
Step 4:
Allow the melted wax mixture to flow into the damaged area, slightly overfilling the scratch for best results.
Allow the melted wax mixture to flow into the damaged area, slightly overfilling the scratch for best results.
Step 5:
Use the sharp grooves of the Special Fillers Applicator to strip off excess material.
Use the sharp grooves of the Special Fillers Applicator to strip off excess material.
Step 6:
To match the wood grain, add details with a darker shade of wax, then use the Special Fillers Applicator to remove any excess.
To match the wood grain, add details with a darker shade of wax, then use the Special Fillers Applicator to remove any excess.
Step 7:
Degrease the area using the sanding paper. Begin with coarse sandpaper (150 grit), then switch to finer grit (240). Note: Sand carefully and only with light pressure over the surface.
Degrease the area using the sanding paper. Begin with coarse sandpaper (150 grit), then switch to finer grit (240). Note: Sand carefully and only with light pressure over the surface.
Step 8:
To protect the repaired area, apply a sealing with the AQUA Brush Pen Clear Lacquer. Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surrounding area.
To protect the repaired area, apply a sealing with the AQUA Brush Pen Clear Lacquer. Apply the lacquer evenly in one direction to the repaired area. If possible, do not apply lacquer to the surrounding area.
Step 9:
Once the lacquer is dry, apply Picobello Premium Special Oil with a cotton cloth to the repaired area and surrounding surface to restore the original oiled/waxed appearance. Repeat if necessary for best results.
Once the lacquer is dry, apply Picobello Premium Special Oil with a cotton cloth to the repaired area and surrounding surface to restore the original oiled/waxed appearance. Repeat if necessary for best results.